20
STEP 8 Delete Memory
“dEL” and flashing yes/no is displayed on the screen. If you do
NOT want to delete memory, press the main button to select “no”
and then press set button to go to step 9. If you’d like to delete
ALL memory, press main button to select “yes”. Then press
set button to delete All memory. ”OK” is displayed in the meter,
which means that all data stored is deleted. Go to step 9.
The time, date and unit of measurement can ONLY be changed in
•
the setting mode. Therefore, when you perform a glucose testing,
those parameters are not possible to be changed.
The meter cannot automatically update daylight saving time. You
•
have to manually adjust the time in the meter according to the
procedures. Please make sure the meter matches the time zone
and adjust the daylight saving time data if required.
Your meter displays 7-, 14-, 21-, 28-, 60- and 90-day averages
•
which you can access from the meter memory. These averages
are calculated from results obtained during the 7-, 14-, 21-, 28-,
60- and 90-day preceding the current date and time settings.
When the date and time are changed, the 7-, 14-, 21-, 28-, 60-
and 90-day averages may change.
While the meter is in the setting mode, it will turn off automatically
•
without any action in one minute.
PLEASE NOTE!
