www.versitron.com
19
Click [Port PVID Setting]
This page is used to setup PVID and Tag mode for each port as follows:
PVID
: The setting value is used for VLAN group lookup index. When a packet is received, the
least four bits (bit 3 ~ bit 0) of the PVID setting of the input port is used as the index mapping to
one VLAN group. The mapped group is used for packet forwarding operation. The valid value
range is 1 ~ 4095.
Refer to section 2.4 for more information about the MNG port.
Tag Mode
: Tag mode setting of each port is preset to Untag mode automatically and they are not
changeable under Port-based VLAN mode.
