Initial Configuration and Setup
6
– Configuration / Operation
VSBC-8 Reference Manual
Initial Configuration and Setup
The following list describes the recommended components and gives an abbreviated outline for
setting up a typical development system.
R
ECOMMENDED
C
OMPONENTS
•
VSBC-8 Single Board Computer
•
168-pin DIMM SDRAM Memory Module PC-100
•
ATX Power Supply
•
SVGA Video Monitor
•
Keyboard with PS2 connector
•
3.5" Floppy Disk Drive (optional)
•
IDE Hard Drive (optional)
•
IDE CD ROM Drive (optional)
DRAM M
ODULE
•
Insert DRAM module into the DIMM socket. Latch into place.
C
ABLES
/ P
ERIPHERAL
D
EVICES
•
Plug video adapter cable (p/n VL-CBL-1007) into socket J1 and attach video monitor.
•
Plug keyboard adapter cable (p/n VL-CBL-1602) into socket J13 and attach keyboard.
•
Plug floppy data cable (p/n VL-CBL-3403) into socket J17 and attach floppy drive.
Note!
Floppy drive should be connected after the twist in the cable.
•
Plug hard drive data cable (p/n VL-CBL-4001) into socket J18. Attach hard drive and
CD ROM drive to the connectors at the opposite end of the cable.
•
Plug power supply into J9.
•
Attach power supply cables to external drives.
•
Jumper hard drive to operate as a master device.
