Multi-purpose I/O
34
VL-EPU-4460 Reference Manual
SPX* Expansion Bus
Up to two serial peripheral expansion (SPX) devices can be attached to the Condor at connector
using a CBR-0901 cable. The SPX interface provides the standard serial peripheral interface
(SPI) signals: CLK, MISO, and MOSI, as well as two chip selects, SS0# and SS1#. The +5 V
power provided to pin 1 of the SPX connector is protected by a 1 A resettable fuse.
The figure below shows the location and pin orientation of the SPX connector.
Figure 16. SPX Connector Location and Pin Configuration
