VersaLogic VL-EPU-4011 Reference Manual Download

Page: 46 / 89

System Setup

VL-EPU-4011 BIOS Reference Manual

Option: Port 1

Disabled

Enabled (default)

Details: Enable or Disable SATA Port

Option: SATA Port 1 Hot Plug Capability

Disabled (default)

Enabled

Details: If enabled, SATA port will be reported as Hot Plug capable.

Option: Mechanical Presence Switch

Disabled

Enabled (default)

Details: Controls reporting if this port has an Mechanical Presence Switch.

Note: Requires hardware support.

Option: Spin Up Device

Disabled (default)

Enabled

Details: If enabled for any of ports Staggerred Spin Up will be performed and only the
drives which have this option enabled will spin up at boot. Otherwise all drives spin up at
boot.

Option: SATA Device Type

Hard Disk Drive (default)

Solid State Drive

Details: Identify the SATA port is connected to Solid State Drive or Hard Disk Drive

Option: SATA Port 1 DevSlp

Disabled (default)

Enabled

Details: Enable/Disable SATA Port 1 DevSlp. Board rework for LP needed before
enable.

Summary of Contents for VL-EPU-4011


























































































Search results

Summary of Contents for VL-EPU-4011

Reviews:

Related manuals for VL-EPU-4011

Brands by name

Popular brands

VersaLogic VL-EPU-4011, Reference Manual

Search results

Summary of Contents for VL-EPU-4011

Reviews:

Related manuals for VL-EPU-4011

Brands by name

Popular brands