System Setup
21
VL-EPU-4011 BIOS Reference Manual
Option: Primary Display
IGD (default)
PCIe
HG
Details: Select which of IGD/PCI Graphics device should be Primary Display
Option: HG Delay After Power Enable
Minimum = 0x0000
Maximum = 0x03E8
Default = 0x012C
Details: Delay in milli-seconds after power enable
Option: HG Delay After Hold Reset
Minimum = 0x0000
Maximum = 0x03E8
Default = 0x0064
Details: Delay in milli-seconds after hold reset
Option: RC6(Render Standby)
Enable (default)
Disable
Details: Check to enable render standby support, RC6 should be enabled if S0ix is
enabled. This item will be read only if S0ix is enabled
Option: GTT Size
2MB
4MB
8MB (default)
Details: Select the GTT Size
Option: Aperture Size
256MB (default)
Details: Select the Aperture Size
