VersaLogic Python EBX-11, Reference Manual

Page: 23 / 74

Physical Details
EBX-11 Reference Manual
17
EBX-11 C
ONNECTOR
F
UNCTIONS AND
I
NTERFACE
C
ABLES
The following table notes the function of each connector, as well as mating connectors and
cables, and the page where a detailed pinout or further information is available.
Table 1: Connector Functions and Interface Cables
Connector
Function
Mating Connector Transition
Cable
Cable Description Pin 1 Location
1
x coord. y coord.
Page
J1 Ethernet 0 RJ45 Crimp-on Plug
– –
0.425 4.200 42
J2 Ethernet 1 RJ45 Crimp-on Plug
– –
0.425 5.500 42
J3 Main Power Input
(EBX Compliant) Molex 39-01-2100
Molex 39-00-0059 (10 ea.) CBR-2022
6” ATX to EPIC power
cable
0.625 6.600 22
J4 COM 1-4, PLED,
PS/2 Keyboard
and Mouse, Reset
Button, Speaker FCI 89361-350LF CBR-5009A 18
” 2mm 50-pin to 50-
pin IDC to breakout
board CBR-5009B
0.380 7.200 26
J5 Analog I/O, PWM
I/O, Digital I/O FCI 89361-340LF CBR-4004A 12
” 2mm 40-pin to 40-
pin IDC to screw
terminal board
CBR-4004B
0.380 7.520 27
J6 SVGA Video
Output FCI 89361-712LF or
FCI 89947-712LF CBR-1201
1’ 12-pin 2mm IDC to
15-pin HD D-Sub VGA
1.700 0.060 39
J7 PC-104- Plus AMP 1375799-1
– –
2.106 3.096
–
J9 LVDS 20-pin, PanelMate 1.25mm CBR-2010
or
CBR-2011
18-bit TFT FPD using
20-pin Hirose
18-bit TFT FPD using
20-pin JAE 2.400 0.190 40
J10 Audio, Digital I/O,
USB 0-1 FCI 89361-340LF CBR-4004A 12
” 2mm 40-pin to 40-
pin IDC to screw
terminal board CBR-
4004B
2.325 7.520 29
J11 CompactFlash Type I or Type II
Compact Flash
– –
3.263 4.501 37
J12 IDE Hard Drive FCI 89947-144LF CBR-4406
CBR-4405
2
18
” 2mm IDE cable
2mm to 0.1” adapter
2.640 7.200 30
J14, J15 PC/104 AMP 1375795-2
– –
5.050 2.700
–
J16 PLD Reprogram-
ming Port
(Factory
use Only)
– – –
4.900 6.025
–
J17 SPX I/O FCI 89361714LF CBR-1401 or
CBR-1402 2mm 14-pin IDC, 2 or 4
SPX device cable 4.280 6.950 55
J18 LPT FCI 89361720LF CBR-2003
12” 2mm 20-pin IDC
LPT
4.270 7.520 33
J20
3
USB 2 Standard USB Series A
– –
5.320 0.642 35
J21 USB 3 Standard USB Series A
– –
5.320 1.337 35
1. The PCB origin is the mounting hole to the lower left, as oriented in Figure 9.
2. CBR-4405 44-pin to 40-pin adapter required to connect to 3.5-inch IDE drives with 40-pin connectors.
3. On Rev. 4.01 and earlier boards, one connector (J13) provided the interface to both USB2 and USB3. The connector was a
2mm 10-pin header. See Table 15 for a pinout of this connector.
StockCheck.com