EBX-11 Reference Manual
7
Configuration and Setup
Initial Configuration
The following components are recommended for a typical development system.
EBX-11 single board computer
200-pin SODIMM (memory module): DDR200, DDR266, or DDR333
ATX power supply with motherboard and drive connectors
SVGA video monitor
Keyboard with PS/2 or USB connector
Mouse with PS/2 or USB connector
IDE hard drive
IDE CD-ROM drive
The following VersaLogic cables are recommended.
Video adapter cable (CBR-1201)
Utility I/O cable (CBR-5009A) and accompanying board (CBR-5009B)
IDE data cable (CBR-4406); may also require 2mm to 0.1” adapter (CBR-4405)
Power adapter cable (CBR-2022)
You will also need a Windows (or other OS) installation CD.
Basic Setup
The following steps outline the procedure for setting up a typical development system. The EBX-
11 should be handled at an ESD workstation or while wearing a grounded antistatic wrist strap.
Before you begin, unpack the EBX-11 and accessories. Verify that you received all the items you
ordered. Inspect the system visually for any damage that may have occurred in shipping. Contact
[email protected] immediately if any items are damaged or missing.
Gather all the peripheral devices you plan to attach to the EBX-11 and their interface and power
cables.
It is recommended that you attach standoffs to the board (see 3) to stabilize the board and make it
easier to work with.
Figure 3 shows a typical start-up configuration.
2
StockCheck.com
