background image

3

3

This  appliance  is  designed  and  manufactured  solely  for  the  cooking  of  domestic  (household) 

food and in not suitable for any none domestic application and therefore should not be used in a 
commercial environment.

The appliance warranty will be void if the appliance is used within a none domestic environment i.e. 

a semi commercial, commercial or communal environment.

WARNING 

- Slide range back so bolt head, on the adjustable bracket assembly, is 

--

under anti-tip bracket.

 

- Look for the anti-tip bracket securely attached to floor or wall.

 

- See installation instructions for details.

 

- Look for the adjustable bracket assembly securely attached to 

--

the back of the range.

 

- Slide range forward.

To verify the anti-tip bracket is installed and engaged:

Tip-Over Hazard

  

Anti-tip bracket

Adjustable bracket 

assembly to be fixed to 

the back of  the range

 

A child or adult can tip the range and be killed.

Install anti-tip device to range and/or structure per installation 

instructions.

Engage the range to the anti-tip device Installed to the structure.

Re-engage anti-tip device if range is moved.

Failure to follow these instructions can result in death or serious 

burns to children and adults

.

                     WARNING: This product can expose you to chemicals including

                    formaldehyde, which is known to the State of California to cause cancer,

and lead, which is known to the State of California to cause birth defects or other

reproductive harm. For more information go to www. P65Warnings.ca.gov.

Summary of Contents for VDFSIE365 Series

















Reviews: