Veromatic MBI01, Installation, Use And Maintenance Manual, Page: 49 / 116

EN
49
6.6.2 Filling product canisters
To ensure continued proper operation of this machine, it may only be filled with products that are
prescribed by your dealer.
1 Open the door of the machine.
2 Open the upper lid.
3 Turn the spouts of the product canisters upwards.
4 Remove the product canisters from the machine.
5 Remove the lids of the product canisters.
6 Fill the canisters to maximum three quarters of the capacity.
!
ATTENTION!
Maximum filling will lead to spillage and cause poor hygiene. Overfilling can prevent
proper functioning of the machine. The products may not be tamped down!
7 Replace the lids on the product canisters.
8 Place the product canisters back into the machine.
9 Turn the spouts of the product canisters back into the correct position.
10 To rinse
→
see daily maintenance paragraph 6.5.
11 Adjust the ingredient counters.
12 Close the upper lid.
13 Close the machine.
14
Take a ‘test’ drink from every
product.