background image

VSW20 Wood Stove

20300059

23

lIMITEd lIFETIME WARRANTY

The following components are warranted for life to the original owner, subject of proof of purchase: 
Firebox weldment and baffle supports.

FIVE YEAR WARRANTY

The following components are warranted against deterioration not resulting from physical or handling 
damage for 5 years to the original owner, subject to proof of purchase: Stainless steel secondary air 
tubes and secondary ceramic baffle material.

ONE YEAR WARRANTY

Vermont Castings warrants the components and materials in your wood stove to be free from manufac-
turing and material defects for a period of one year from date of purchase. After installation, if any of the 
components manufactured by Vermont Castings in the appliance are found to be defective in materials 
or workmanship, Vermont Castings will, at its option, replace or repair the defective components at no 
charge to the original owner. Vermont Castings will also pay for reasonable labor costs incurred in replac-
ing or repairing such components for a period of one year from the date of installation. Any products 
presented for warranty repair must be accompanied by a dated proof of purchase.

This Limited Lifetime Warranty will be void if the appliance is not installed by a qualified installer in accor-
dance with the installation instructions. The Limited Lifetime Warranty will also be void if the appliance is 
not operated and maintained according to the operating instructions supplied with the appliance, and does 
not extend to (1) firebox/burner assembly damage by over-firing, over-loading, accident, neglect, misuse, 
abuse, alteration, negligence of others, including the installation thereof by unqualified installers, (2) the 
costs of removal, reinstallation or transportation of defective parts on the appliance, or (3) incidental or 
consequential damage. All service work must be performed by an authorized service representative.

This  warranty  is  expressly  in  lieu  of  other  warranties,  express  or  implied,  including  the  warranty  of 
merchantability of fitness for purpose and of all other obligations or liabilities. Vermont Castings does 
not assume for it any other obligations or liability in connection with the sale or use of the appliance. 
In states that do not allow limitations on how long an implied warranty lasts, or do not allow exclusion 
of indirect damage, those limitations of exclusions may not apply to you. You may also have additional 
rights not covered in this Limited Lifetime Warranty.

Vermont Castings reserves the right to investigate any and all claims against the Limited Lifetime War-
ranty and decide upon method of settlement.

IF WARRANTY SERVICE IS NEEdEd...

1.  Contact your supplier. Make sure you have your warranty, your sales receipt and the model/serial 

number of your MHSC product.

2.  DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

Vermont Castings WOOd STOVE

LIMITED LIFETIME WARRANTY POLICY

Summary of Contents for VSW20

























Reviews: