20306748
9
MLDV Series Gas Fireplace
The
fi
replace must be secured to the
fl
oor and/or to framing
studs as shown in
Figure 6.
Use two (2) wood screws or
masonry/ concrete screws to secure
fi
replace to the
fl
oor.
Use four (4) screws to attach
fi
replace to framing. The side
nailing
fl
anges are 1/2" or 5/8" to accommodate different
wall thickness.
SECURE FIREPLACE TO FLOOR OR FRAMING
Figure 6 -
Secure Fireplace to Floor and Framing Studs
Framing
Screws
Nailing Flange
Insulation Board
DO NOT REMOVE
FP1989
NOTE
DO NOT REMOVE INSULATION
BOARD
FINISHING MATERIAL
NOTE:
Any remote wiring (i.e. remote control, wall switch,
and optional fan) must be done prior to
fi
nal
fi
nishing to
avoid costly reconstruction.
Only noncombustible materials (i.e. brick, tile, slate, steel,
or other materials with a UL
fi
re rating of Zero) may be
used to cover the black painted face of the appliance. It is
permissible to bring combustible wall board to the top and
side edges of the black painted face. A 300°F minimum
adhesive may be used to attach facing materials to the
black surface. If joints between the
fi
nished wall and the
fi
replace surround are sealed, a 300°F minimum sealant
material (General Electric RTV103 or equivalent) must be
used.
