20306748
45
MLDV Series Gas Fireplace
FINAL INSTALLATION
Figure 64 -
Rock Wool Placement on Burner.
Figure 65 -
Install log #1
NOTE: Placing rock wool on burner provides glowing
embers. For best results, pull the rock wool apart into
pieces the size of a dime or smaller.
Log #1
Do not use the entire bag of rock wool to cover
the burner. This could cause the
fl
ame to burn
poorly and may lead to sooting.
NOTICE
ROCK WOOL PLACEMENT
1. Distribute one layer of rock wool to cover all round
burner ports. Do not cover rectangular slots, located in
front and rear.
Figure 64
Figure 66 -
Install Log #2
Log #2
LG544
LOG PLACEMENT
1. Place log #1 by setting the log over the rear bracket
over the two pins.
Figure 65
2. Place log #2 at angle across the burner by setting the
logs over the two pins located on top of the burner.
Figure 66
3. Place log #3 at an angle over log #2 toward the back
by matching the rectangular notch on the bottom of this
log with the rectangular protrusion on log #2. Then set
the notch located on the bottom of this log toward the
back over the metal bracket located to the right side of
the burner.
Figure 67
4. Place log #4 by matching the rectangular protrusion on
the bottom of this log over the rectangular notch on log
#1, then swing the log slightly toward the front and set
the log over the notch located on the upper surface of
log #3.
Figure 68
Figure 67 -
Install log #3
Figure 68 -
Install log #4
Log #3
LG545
