background image

2

Encore Multi-Fuel Heater

2000971

Congratulations on your choice of a Vermont Castings Encore Multi-Fuel Heater. With this purchase you have made 
a commitment to make the hearth a place of warmth, beauty, and comfort in your home. At MHSC, we share that joy 
and appreciation for the hearth. You may be assured that your cast-iron Vermont Castings stove has been made with 
the utmost care and will provide you with many years of service.
At Vermont Castings, we are equally committed to your satisfaction as a customer. That is why we maintain an exclu-
sive network of the finest dealers in the industry. Our dealers are chosen for their expertise and dedication to custom-
er service. They are factory-trained and knowledgeable about every Vermont Castings product. Feel free to contact 
your Authorized Vermont Castings Dealer anytime you have a particular question about your stove or its performance.
This manual contains valuable instructions on the installation and operation of your Vermont Castings stove. It also 
contains useful information on maintenance and assembly of this product. We urge you to read the manual thoroughly 
and to keep it as a reference.

Sincerely,

All of us at MHSC

welcome

The Encore Multi-Fuel 2547CE is designed for burning 
wood and most smokeless solid fuels.
Consult a professional, solid fuel service person to 
install your stove, or to advise you on the installation 
should you wish to install it yourself.
Please read the entire manual before you install and 
use your new room heater. Failure to follow instructions 
may result in property damage, bodily injury, or death.

Specifications ................................. 3
Installation ...................................... 4
Assembly .......................................11
Operation ...................................... 12
Draft Management ........................ 17
Maintenance ................................. 19
Replacement Parts ....................... 23
Warranty ....................................... 27

table of Contents

Summary of Contents for Encore 2547CE





























Reviews: