36
20306747
DVM Series Direct Vent Gas Fireplace
LG664
DVM rock wool
Figure 56 -
Place Rock Wool
LG664
CAUTION
Do not use the entire bag of rock wool to cover the
burner. This could cause the flame to burn poorly
and may lead to sooting.
LG665
DVM rear log
2. Place the rear log by aligning the holes in the
bottom of the rear log with the two pins located
at the rear of the burner on the bracket.
Fig-
ure 58
LG665
Rear Log
LG667
DVM left middle log
Figure 57 -
Place Rear Log
Left Middle
Log
LG667
3. Place the left middle log by aligning the
holes in the bottom of the log with the
two pins located on the left side of the
burner.
Figure 58
1. Distribute one layer of rock wool to cover
all round burner ports. Do not cover rect-
angular slots, located in front and rear.
Figure 57
NOTE:
Placing rock wool on burner provides
glowing embers. For best results, pull the
rock wool apart into pieces the size of a dime
or smaller.
Figure 58 -
Place Left Middle Log
FINAL INSTALLATION
