CFDV Series Gas Fireplace
20306739
47
FINAL INSTALLATION
GLASS FRAME REMOVAL
NOTE:
You must first remove the safety barrier before you
remove the glass frame. To remove the barrier, simply lift up
and pull out until the tabs are clear of their corresponding
slots on the firebox. Then proceed to remove the glass
frame by following the steps below.
1. Remove heat shield by pulling forward.
2. Release the two (2) latches on the top of the fireplace
by pulling forward and up.
Figure 77
3. Tilt glass frame out and lift glass frame up and away.
Figure 78
4. Set glass frame aside.
Figure 78 –
Remove Safety Barrier and Glass Frame
CAUTION
Each latch has a quick spring force. When
reinstalling glass, keep fingers clear.
FP3041
glass frame latch
Figure 77 –
Glass Frame Latch
DANGER
HOT GLASS
WILL
CAUSE BURNS
.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Un panneau vitré chaud
peut
causer des brûlures.
Laissez refroidir le panneau
vitr
é
avant d’y toucher.
Ne laisser jamais
les enfants
toucher le panneau vitr
é
.
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
Une barrière visant à réduire le risque de brûlure
par le hublot chaude est fournie avec cet
appareil et doit être installé.
DANGER
Glass Frame
Safety Barrier
