Fan Kit #2767/FK26
-
Installation Instructions
for Radiance, Stardance, Dutchwest & Oxford Gas Heaters and
Defiant NC, Dutchwest NC and Encore NC Wood Stoves
2003135_R16 • 04/17
MOTOR
SNAPSTAT
ON/OFF
RHEOSTAT
WHT
WHT
BLK
BLK
BLK
GRN
BLK
ST236
FK26 wiring diagram
12/99
#2767 / FK26 Fan wiring diagram.
Please read these instructions before proceeding with
installation.
Kit contents
• Fan Assembly with Rheostat and Snapstat
• Fan Mounting Bracket for RVF33
• Snapstat Mounting Bracket
• 1/4 - 20 x 3/4” hex head screws, (4)
• 1/4 - 20 hex nuts, (2)
• 1/4” Star Washers, (2)
• #8 Star Washer, (1)
• #10 Sheet Metal Screws, (2)
• Retaining Nut (1)
• Control Knob
• Wire Tie
Tools Needed
• Flat blade screwdriver
• Work gloves
• Phillips screwdriver
It is easiest to install the fan before the stove is connected
to the gas supply line. Compare the contents of the fan kit
with the list above and Figure 1 to confirm that you have all
of the parts.
DESIGN
CERTIFIED
Fan Kit contents.
Rad2767 Fan Kit Parts.eps
RDV40, RNV40,
RVF33, SDV30
Snapstat Bracket
Rheostat
Fan Assembly
RVF33 ONLY
Fan Mounting
Bracket
#8 Star
Washer
1/4” Star
Washer
1/4”Star
Washer
1/4-20 x 3/4”
Hex Bolts
1/4-20 Hex
Nuts
#10 Sheet
Metal
Screws
1/4-20 x 3/4”
Hex Bolts
Connect to PC Board
on RF Models Only
Snapstat
This kit fits several different stoves; follow the procedures for
your specific stove. Match these instructions to the model
name and/or number on the stove’s instructions or nameplate.
Avoid any drafts that alter burner flame patterns. Do
not allow fans to blow directly into the fireplace.
This optional fan kit is equipped with a three-pronged
(grounding) plug for your protection against shock
hazard and should be plugged directly into a properly
grounded three-pronged receptacle. Do not cut or
remove the grounding prong from this plug.
WARNING
!