Single or multiple output?
The trigger-patterns being defined by the sliders can be send to other modules in two ways.
So far, we have described the functions of randomRHYTHM when using
SEQ OUT
y
to output the trigger-patterns.
This output contains the logical sum of the four subdivisions 1/4, 1/8, 1/16 and 1/3. It can be used to trigger a single
drum-sound such as a hihat, any percussion instrument as well as an envelope - everything that wants a trigger-
signal.
The second method to output trigger-signals is to use the individual outputs
1/4
u
,
1/8
i
,
1/16
o
and
1/3
a
. These
allow to distribute the trigger-signals to several modules.
On- and Offbeat
The individual outputs
1/8
i
,
1/16
o
and
1/3
a
offer two operating modes. Toggle between these modes by using
the
OFFBEAT
d
switch per rhythm-section.
With
OFFBEAT
d
being active (corresponding yellow LED lit), the individual outputs
1/8
i
,
1/16
o
and
1/3
a
send
out the trigger-impulses as being described in “The concept” on page 26. In this mode the individual outputs work
exactly like the divisions on the
SEQ OUT
output
y
.
EN
33
