V500, V500 30°
2020-09
Using your wheelchair
10
EN
NL
3.6 Backrest inclination (V500 30°)
Risk of injuries
Be aware that the stability decreases when backrest is adjusted backwards.
Apply the parking brakes before adjusting the backrest.
Risk of injuries
Do not place your fingers, clothes between the adjustment mechanism.
For model V500 30°, it is possible to set the backrest backwards with a maximum inclination of
30° (4 different positions: steps of 10°). Make sure that the patient sits in the chair when the
attendant adjusts the backrest inclination and that the wheelchair does not tip over.
1. Pull the lever
on both sides towards the push handle
to adjust the backrest.
2. The pen
Ⓐ
comes out of the groove of the toothed plate
Ⓑ
.
3. Pull both back tubes backwards to the desired position (4
different positions: 5° - 15° - 25° - 35°).
4. Check that the pen
Ⓐ
is well fixed in the groove of the
toothed plate
Ⓑ
.
If your wheelchair features drum brakes, the handles
are
used as brakes.
3.7 Mounting or removing the push bar (V500 30°)
Risk of injuries
Make sure that buttons
Ⓐ
are tightened.
When equipped with the push bar, the push bar should always be mounted to increase the
stability of the back.
WARNING
CAUTION
WARNING
