Vermeiren V300 DL, Instruction Manual

Page: 20 / 176

V300DL
2016-03
Page 18
3 Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren V300DL has been designed to be adjust with a minimum of replacements
parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1 Tools
To set up the wheelchair the following tools are needed.

Wrench set n° 10 to n° 22

Allen keyset n° 4 to n° 6
3.2 Manner of delivery
The Vermeiren V300DL shall be delivered with:

1 frame with armrests, rear and front wheels (standard delivery
seat height: 500 mm without seat cushion, seat angle: 5°)

Seat cushion

Anti-tipping (only right side)

1 pair footrests

Tools

Manual

Accessories
3.3 Adjusting the seat height and seat angle
The Vermeiren V300DL is adjustable in 4 seat heights and 5 seat angles (0°-2,5°-5°-7,5°-
10°) by changing the position of the wheels for each height and angle there is a different
setting of the front and rear wheels.
The summary of the different seat heights by a standard seat angle 5° is tabulated below.
Seat height
(without seat cushion)
Rear wheels Front wheels
Hole Hole
Bushing
Ⓑ
relative to castor
stem housing
Ⓒ
440 mm
 
Above
470 mm
 
Under
500 mm (Standard)
 
Under
530 mm
 
Under
Table 2: Seat heights by seat angle 5°