Vermeiren V100, Instruction Manual

Page: 25 / 248

EN
V100
2010-11
Page 23
3.7 Adjusting the arm support
The arm support of your wheelchair can be adjustable in height and depth. The height of the
arm support can be adjusted in 3 positions.
Height armsupport to seat Number of the blocks
under the tube
Number of blocks
between tube and
armrests
220 mm (8.66 in.) (Standard) 2 1
230 mm (9.06 in.) 1 2
240 mm (9.45 in.) 0 3
Table 4: Height of arm support
The depth of the armrest can be adjusted in 3 positions.
Depth of the armrest Used holes
Front position Back and middle
Middle position (Standard) Hole 2 and 4
Back position Front and middle
Table 5: Depth of armrest
Adjust the height and the depth of the armrest as follow:
1.
Remove both screws under the armrest.
2. Place the correct number of blocks under and above the tubes, see table 4.
3. Install the armrest with the required holes for depth adjustment.