Provence,
Normandie,
Languedoc
2016-01
Page 15
3.3.1 Mounting backrest
For assembly of the backrest, you should lay the model on a flat surface on its side.
Move the backrest backwards until the sockets on the lower back frame and the
suspension eye of the pneumatic spring lie over one another.
Guide the locking pin
through the back sockets and the pneumatic spring. Two
plastic washers
are to be inserted before and after the pneumatic spring socket as
a spacer guide. Afterwards, secure the locking pin
by guiding the tension spring
over the pin until it projects out over the end of the spanning pin.
3.3.2 Mounting seat
L
WARNING:
Risk of injury – Make sure that no objects or body parts come
between the seat and the frame.
The seat is attached to the basic frame with clamping fixtures.
A
B
1 = seat
2 = curved fixture
3 = back crossbar
4 = clamp
5 = front crossbar
A
B
A
B
Summary of Contents for Languedoc
Page 118: ... Notes ...
Page 119: ......