EN
Jazz, Jazz 30°
2011-01
!"#$%&*%
2.14 Transport in the car
!
"
WARNING:
Risk of injury
!
See that the wheelchair is attached properly. So you
can avoid injury from the passengers during collision or sudden braking.
!
"
WARNING:
Risk of injury
!
Use for attaching the wheelchair and passenger
NEVER the same seatbelt.
1.
Remove footrests and accessories.
2.
Store footrests and accessories safely.
3.
If possible, fold the wheelchair and remove the wheels.
4.
Place the wheelchair in the luggage place.
5.
If the wheelchair and the passenger compartment is NOT separated, attach the
frame of the wheelchair securely to the vehicle. You can use the available safety
belts in the vehicle .
2.15 Back adjusting
With the model Jazz 30° it is possible to adjust the angle of the back.
!
"
WARNING:
Risk of injury
!
Before adjusting the back, tighten the parking brakes.
To adjust the back rest backwards use following steps:
1.
Pull handle
!
on both sides at the same time.
2.
Pull the back backwards in the desired position
(continuously to a maximum inclination of 30°).
To adjust the back rest back to the vertical position use
following steps:
1.
Pull handle
!
on both sides at the same time.
2.
Push the back to the vertical position.
3
Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren Jazz has been designed as lightweight wheelchair with a minimum of
adjustments.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
!
"
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
!
"
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1 Tools
To set up the wheelchair the following tools are needed.
Wrench set n° 10 to n° 19
Allen key set n° 4 to n° 5
Screwdriver Phillips head
