Inovys II-F
2016-05
Page 17
Ⓐ
Front tube
The basic frame and the seat frame are screwed together with the front tube
Ⓐ
. In the basic
frame three different sockets are provided for these screws which determine the
wheelchair’s seat height.
Ⓑ
Attachment plate gas pressure spring
In addition to adjusting the frame, the gas pressure spring for the seat inclination can be
fixed at three different attaching heights
Ⓑ
. So that the angle of inclination can be kept for
the seat inclination, the assembly height of the gas pressure spring
Ⓑ
must correspond to
the assembly height of the front tube
Ⓐ
.
Ⓒ
Rear wheel plate
The rear wheel plate
Ⓒ
must correspond to the assembly height of the front tube
Ⓐ
.
3.5 Position
wheels
L
WARNING:
Risk of tipping over – Be aware that you change the stability of the
wheelchair when changing the position of the driving wheels.
L
WARNING:
Risk of injury – Make sure that the rear wheels on both sides are
mounted in the same position.
DRIVING WHEELS
Four possible wheel sockets are provided in a
swage block of the frame for the use of driving
wheels (24”)
Ⓐ,
(22")
Ⓑ
. Depending on which
suspensions are used to attach the driving
wheels, the wheel position (stability or
manoeuvrability of wheelchair: 45 mm). The
wheel sockets attached in the delivery condition
can be attached in all sockets (bore holing).
The wheel sockets in the frame tubing
Ⓒ
serve only to attach 16” wheels (transit version).
The stability or manoeuvrability of the wheelchair can be adjusted over 50 mm.
STEERING WHEELS
In the standard model, the INOVYS II-F is delivered with two 8” steering wheels (200 mm x
50 mm or 200 mm x 35 mm).
Summary of Contents for Inovys II-F
Page 151: ......
