Carpo 3, Carpo 4, Carpo 3D, Carpo 4D
2021-05
Content
Installation manual
- 5 -
EN
NL
PL
CS
3
Assembly and adjustments
Important remarks
•
Read the user manual of this scooter.
•
Be aware of the technical details and limits of intended use; see the user manual.
•
For more information, contact Vermeiren.
3.1
Tools
To set up the scooter, the following tools are needed:
•
Wrench set n° 13, 17
•
Allen keyset n° 6, 8
Risk of injuries or damage
•
The scooter needs to be (dis)assembled and adjusted by a specialist dealer according to the
instructions in this chapter.
•
Only use parts and tools described in this manual.
•
Prevent bystanders from accessing the (dis)assembling area.
•
Keep the (dis)assembling area clean and tidy, to prevent falling.
•
Collect all small parts in a box or bag.
•
While (dis)assembling and operating the scooter, make sure no objects or body parts get
caught between moving parts. In particular, pay attention to the position of the cables.
•
Turn the scooter off before you perform any mechanical adjustments and make sure that the
free-wheel lever is in braking position.
•
Make sure all screws are firmly secured before driving.
•
Software changes are only allowed if executed by skilled personnel, taking into account the
user and environment (stability, accellaration, indoor/outdoor, etc.).
CAUTION
