Vermeiren Carpo 4 deluxe, Instruction Manual

Page: 21 / 40

Carpo 4 Deluxe
2012-04
Page 19
3.3 Adjusting the steering unit
The steering unit can be adjusted in to many different positions (stepless) to suit each driver.
L L L L
WARNING: Risk of injury - Never adjust the angle while you are driving.
L L L L
WARNING: Risk of injury - Turn the scooter off before you adjust the angle of the steering
column.
1. Push or pull the lever .
2. Adjust the steering unit in the desired position.
3. Release the lever .
3.4 Adjusting the seat
L L L L
WARNING: Risk of injury - Never perform adjustments while you are driving.
L
L L
L
WARNING: Risk of injury - Make sure that the seat is locked securely.
Remove seat
•
Pull the seat lever upwards.
•
Pull the seat up and out with two persons.
•
Check that the seat is firmly secured in place.
Locking the seat in place
Do the reverse when you want to replace the seat.
•
Pull the seat lever upwards and at the same time put the receiver on the seat guide and
press as far down as it will go.
•
When you hear the seat lock in place, the seat lever must be in a horizontal position. If it is still
pulled upward, the seat has not been locked in place yet.
Swivel seat
•
Pull the seat lever upwards.
•
Turn the seat in the desired direction.
•
Let go of the seat lever , and the seat will always stop after 90°.
Depth adjustment
•
Pull upward the seat depth adjustment lever .
•
Move the seat forward or backward over the seat depth rail .
•
To lock the seat in place, let go of the lever once the seat has reached the desired position.
•
Swivel the seat a little until it locks in position.
•
Check the seat is locked securely.
1