2202, 2215
2015-03
Page 10
3.4 Adjust the brakes
Adjust the brakes according following rules:
1. The brake tightness can be adjusted by the
brake
cable
adjuster
.
3.5 Adjusting the chain
The wheels of the tricycle are driven by a chain
on the rear axle.
For first time use the chain
is set in the
factory. After a while it is possible that the chain
runs off the axle, the chain
has to be
tightened by extending the frame of the tricycle:
On the frame behind the saddle tube you see
two horizontally mounted length-adjustable
tubes.
By unscrewing the clamping screws
on both
tubes, the frame
can be extended. When the
chain between the two chain-wheels can be
moved ± 20 mm, the chain
tension is correct.
After adjusting the frame length, retighten the
clamping screws
.
3.6 Adjusting the handlebar
L
CAUTION:
Risk of injury – Check that the handlebar is firmly secure before
using the tricycle.
The height and angle of the handlebar can
easily be adjusted.
Adjusting height:
1. Loosen
the
screw
.
2. A softly tap on the head of the cone.
3. Adjust the height of the handlebar to a
comfortable position (stepless --
depends on handlebar model).
4. Tighten
the
screw
properly.
Adjusting angle:
1. Loosen
the
screw
.
2. Adjust the angle of the handlebar to a
comfortable position (stepless).
3. Tighten
the
screw
properly.
