125367.PDF
1
EN - 02/10
SAFETY INFORMATION
AbOuT ThIS SupplEMENT
Cannondale Owner’s Manual Supplements provide
important model specific safety, maintenance, and technical
information. They are not replacements for your
Cannondale
Bicycle Owner’s Manual.
This supplement may be one of several for your bike. Be sure
to obtain and read all of them.
If you need a manual or supplement, or have a question
about your bike, please contact your Cannondale Dealer
immediately, or call us at one of the telephone numbers listed
on the back cover of this manual.
You can download Adobe Acrobat PDF versions of any
Cannondale Owner’s Manuals or Supplements from our
website:
http://www.cannondale.com/bikes/tech.
• This manual is not a comprehensive safety or service
manual for your bike.
• This manual does not include assembly instructions for
your bike.
• All Cannondale bikes must be completely assembled and
inspected for proper operation by a Cannondale Dealer
before delivery to the owner.
WARNING
This supplement may include procedures beyond the
scope of general mechanical aptitude.
Special tools, skills, and knowledge may be required.
Improper mechanical work increases the risk of an
accident. Any bicycle accident has risk of serious
injury, paralysis or death. To minimize risk we strongly
recommend that owners always have mechanical work
done by an authorized Cannondale retailer.
hEAdShOk SOlO w/dl50 bIcYclE FORk
SupplEMENT
Please consult the Cannondale
Solo Bicycle Fork Owner’s
Manual Supplement
for care and maintenance information
concerning the fork and front wheel removal and installation.
REAR bRAkE ROTOR
WARNING
kEEp YOuR hANdS ANd FINGERS clEAR OF ThE
bRAkE ROTOR ANd chAINcASE!!
chAINcASE hub cAp
NOTIcE
dO NOT RIdE ThIS bIkE WITh ThE chAINcASE hub
cAp REMOvEd.
Serious damage to the hub will result.
See page 13.
bIcYclE REpAIR / WORk STANdS
The clamping jaws of a bike stand can generate a crushing
force strong enough to seriously damage your frame.
NOTIcE
Never place your bike in a bike stand by clamping the
frame.
Place your bike in a stand by extending the seat post and
positioning the stand clamp on the extended seat post.
Don’t extend beyond the MINIMUM INSERT line marked
on the seat post.
Since a seat post can also be damaged by clamping force,
adjust the stand clamp for the minimum clamping force
needed to secure the bike.
Also, before clamping, clean the post and protect the seat
post finish with a rag.
