Cannondale ON Manual Download Page 2

2

3

125637.PDF

INTENdEd uSE

General purpose Riding

cONdITION 2 

Bikes designed for riding Condition 1, plus smooth gravel 
roads and improved trails with moderate grades where the 
tires do not lose ground contact.

INTENdEd 

For paved roads, gravel or dirt roads that are in good condition, 
and bike paths. 

NOT INTENdEd

 

For off-road  or mountain bike use, or for any kind of jumping.   
Some of these bikes have suspension features, but these 
features are designed to add comfort, not off-road capability. 
Some come with relatively wide tires that are well suited to 
gravel or dirt paths. Some come with relatively narrow tires 
that are best suited to faster riding on pavement. If you ride 
on gravel or dirt paths, carry heavier loads or want more tire 
durability talk to your dealer about wider tires. 

MAXIMuM WEIGhT lIMIT

RIDER  

lbs / kg

LUGGAGE 

lbs / kg

TOTAL 

lbs / kg

300 / 136

30 / 14 

330 / 150 

WARNING

uNdERSTANd YOuR bIkE ANd ITS INTENdEd uSE.  

   

uSING YOuR bIkE ThE WRONG WAY IS dANGEROuS.

Industry usage Conditions 1 - 5 are generalized and 
evolving.   Consult your Cannondale Dealer about how you 
intend to use your bike.

please read your 

Cannondale Bicycle Owner’s Manual 

for more information about Intended use and 

conditions 1-5.

IdENTIFIcATION

SERIAL NUMBER LOCATION

(7-character barcode label)

26 x 13mm

(code 3 of 9)

6-DIGIT 
SEQUENCE IN YEAR

 YEAR CODE        

MANUFACTURING CODE

DRAIN HOLE

 

Serial Number 

 

 

The serial number for this bicycle is printed on a barcoded label on the underside of the bottom bracket.   Use this serial 

number for warranty registration and theft recovery.  See your 

Cannondale Bicycle Owner’s Manual

 for more information on 

warranty registration. 

 

Manufacturing code

 

There is also a Cannondale  manufacturing  stamped on the bottom bracket node.  This stamped number consists of several 
numbers such as  factory shop order,  frame code, and frame size code. 

 

 

Summary of Contents for ON














Reviews: