13
BASIC OPERATION
RECEIVING A PHONE CALL
When the phone rings, lift the handset, press
HEADSET
or press
SPEAKER
to begin
your conversation. You can adjust the volume of the caller’s voice by pressing the
Volume Buttons on the base of the telephone.
PLACING A PHONE CALL
1.
Lift the handset, press
HEADSET
or press
SPEAKER
and wait for a dial tone. The
9225 selects Line 1 by default. To place a call on Line 2, press
LINE2
before
selecting handset, headset or speaker.
2.
Dial the telephone number you wish to call. The number will appear on the display
window.
PREDIAL
1.
While the handset is on hook, enter the desired telephone number using the key pad.
The number will appear in the display. To delete a digit or entire number, press
3
.
2.
To dial the displayed number, lift the handset, press
HEADSET
or
SPEAKER
.
SPEAKERPHONE
1.
Receiving Incoming Calls
a.
When the phone rings
,
press and release
SPEAKER
and speak normally into
the built-in microphone from a distance of 5-6 inches.
b.
You can adjust the volume of the caller’s voice by pressing the Volume Buttons
on the base of the telephone.
c.
After the conversation has finished, press and release
SPEAKER
to hang up.
2.
Making A Call
a.
Press and release
SPEAKER
. The 9225 selects Line 1 by default. To place a
call on Line 2, press
LINE2
.
b.
When you hear a dial tone, dial the number or press a memory
button. The number will appear on the display window.
c.
When your party answers, adjust the volume of the conversation by pressing the
Volume Buttons on the base of the telephone.
d.
After the conversation has finished, press and release
SPEAKER
to hang up.
Note:
1.
If you wish to switch from speakerphone to handset, simply lift the handset.
2.
If you wish to switch from handset to speakerphone, press and release
SPEAKER
and then hang up the handset.
CALL TIMER
Approximately 5 seconds after the beginning of a call, a call timer will appear on the
display.
