3
Record the Asset Guard serial number (ESN) found on the
device label and the trailer’s identification number.
1. Select a mounting location on the nose rail centered from
side-to-side where device will not be damaged. Place the
mounting flanges against the trailer’s top rail so that round
battery access panel is on the left.
2. Using the device mounting flanges as a template, mark
the location for each of the four (4) mounting screws on
the trailer nose rail.
3. At each marked location, drill a 3/16” hole.
(Safety glasses / eye protection recommended)
4. Remove any metal shavings from hole and cross member
surfaces.
5. Install the mounting screws (4) through the mounting
flanges and into the trailer’s top rail.
6. Tighten screws (4).
Record the Asset Guard serial number (ESN) found on the
device label and the trailer’s identification number.
CAUTION:
Remember to mount Asset Guard in a location it will
not be damaged by stacking or by normal operation.
1. Using the device mounting flanges as a template, mark the
location for each of the four (4) mounting screws on the
trailer cross member.
2. At each marked location, drill a 3/16” hole.
(Safety glasses / eye protection recommended)
3. Remove metal shavings from holes cross member
surfaces.
4. Mount device using screws (4), flat washers (4) and self-
locking nuts (4). Ensure flat washer is between screw
head and plastic device housing.
5. Tighten each screw using 5/16” socket, ratchet and 3/8”
open-end wrench.
Trailer Nose Installation
Heavy Equipment Chassis Installation