manualshive.com logo in svg

Verizon ACT231, User Manual, Page: 12 / 531

Share
Download
Verizon ACT231 User Manual Download Page 12

12

System Requirements

The Delphi Connect smartphone app works on:

•  Android 2.2 and later

•  Apple iOS 5.0 and later

The Delphi website at 

mycar.delphi.com

 works with:

•  Internet Explorer 7 and later

•  Google Chrome

•  Apple Safari

•  Firefox

Note: Bluetooth® features of this product are only available by using the Delphi Connect smartphone app.

Installation Requirements

• A supported vehicle identified in the fitment guide at 

connectedcar.delphi.com/fitment

• Relocation Kit

*

, if needed (refer to the fitment guide for a recommendation)

• An activated Delphi Connect module with a qualified Verizon Wireless service plan

If you do not have a Verizon Wireless service plan, please visit 

vzw.com/certifieddevice

 to 

activate this product before starting installation. When asked for Device ID, enter the ESN DEC 

found on the label of the module.

*

 Sold Separately

Summary of Contents for ACT231




















































































































































































































































































































































































































































































































































Reviews:

No comments