21
Using the network mailbox
Verizon 200 / USA EN / A31008-M1929-R301-2-6019 / answnetwork-mailbox.fm / 9.6.08
Operating the answer machine using the
keypad
The following keys are used:
Activating the answer machine
~
Dial your own number.
¤
Allow the phone to ring until the ring
back tone stops and the phone
answers.
~
Enter system PIN.
G
Press
the
G
key.
You will hear a beep. Your answer
machine is now activated and the acti-
vated announcement is played back.
Deactivating the answer machine
~
Dial your own number.
; ~
While listening to your
announcement, press the
;
key and enter the system PIN.
9
Press
the
9
key.
You will hear a beep. Your answer
machine is now deactivated.
Using the network mailbox
The network mailbox is your network pro-
vider's answer machine within the net-
work. You cannot use the network mail-
box unless you have
requested it
from
your network provider.
Configuring the network mailbox
for fast access
Entering the network mailbox number
§Menu§
¢
Voice Mail
¢
Settings
~
§OK§
Enter the number of the
network mailbox and press
§OK§
.
The setting for fast access applies to all
handsets.
If your network voice mail requires a pass-
word for access, it is possible to add a
password by entering pauses immediately
after entering the mailbox access number,
then entering your password.
Calling your network mailbox
f
Press the
f
key briefly.
You are connected directly to
the network mailbox.
If you have new messages in your network
mailbox:
§Call§
Press the display key to call
your network mailbox.
d
Press Handsfree key
d
, if
required. You hear the net-
work mailbox announcement.
For further operation steps, please refer to
the instructions provided by your mailbox
operator.
0
Delete the current message.
A
Repeat the previous message.
B
Play the message.
3
Skip to the next message.
G
Turn on the answering machine.
H
Stop
message
playback.
9
Turn off the answering machine.
;
Enter the remote access code if
the answering machine is on.
Note:
After message playback, if no key operation
is detected for 10 seconds, the call will be
terminated.