Table 2-11
RAID Controller indicator LED descriptions and definitions
(continued)
Definition
Description
LED
Off - The controller is operating normally.
Amber - A controller fault has been detected or a service action is
required.
Blinking amber - Hardware-controller power on error, or a cache
flush or restore error.
Fault
4
Off - The controller is not prepared for removal.
Blue - The controller is prepared for removal.
OK to Remove
5
White - The controller is being identified.
Identify
6
Off - In a working controller, the cache is clean (contains no
unwritten data). This is an occasional condition that occurs while
the system is booting.
Green - The cache is dirty (contains unwritten data) and the
operation is normal. The unwritten information can be the log data
or the debug data that remains in the cache. By itself, a Green
cache status LED does not indicate that any user data is at risk or
that any action is necessary.
Blinking Green - A Compact Flash flush or a cache self-refresh is
in progress, indicating cache activity.
Cache Status
4
7
Off - The Ethernet link is not established, or the link is down.
Green - The Ethernet link is up (applies to all negotiated link
speeds).
Network Port
Link Activity
Status
5
8
Off - The link is up at 10/100base-T negotiated speeds.
Amber - The link is up and negotiated at 1000base-T speed.
Network Port
LInk Speed
5
9
Off - The port is empty or the link is down.
Green - The port is connected and the link is up.
Expansion Port
Status
10
57
About the Veritas 5U84 Storage Shelves
About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
