Figure 1-10
NetBackup 5340 Appliance on-board network interface port
locations
ETH0/
NIC1
ETH2/
NIC3
ETH1/
NIC2
ETH3
/NIC4
IPMI
ETH2/
NIC3
Table 1-15
NetBackup 5340 Appliance on-board network interface port
information
Function
Item
Used for the initial configuration of the appliance. After
completing the initial configuration, you can connect NIC1
(eth0) to an administrative network that does not provide any
backup data transfer.
For more information, see the
Veritas NetBackup™ 53xx
Appliance Initial Configuration Guide - Release 3.1
.
Note:
Veritas does not support forming a NIC bond using
eth0/NIC1 with other eth/NIC ports.
eth0/NIC1
(copper/RJ45 connector)
A 1-GbE port for general use
eth1/NIC2
(copper/RJ45 connector)
A 1-GbE port for general use
eth2/NIC3
(copper/RJ45 connector)
A 1-GbE port for general use
eth3/NIC4
(copper/RJ45 connector)
A 1-GbE port that is used for appliance remote management
purposes
IPMI port
(copper/RJ45 connector)
34
About the NetBackup 5340 Appliance
About the appliance compute node rear panel