VERITAS NetBackup 5340 Appliance Product Description Download Page 10

Page: 10 / 87

Table 1-1

NetBackup 5340 Appliance system specifications

(continued)

NetBackup 5340 Appliance system

Technical
Specification

Appliance compute node:

■

Height: 8.89cm (3.5") (approximately 2U)

■

Width: 48.35cm (19")

■

Depth: 79.38cm (31.25")

See

“NetBackup 5340 compute node technical specifications”

on page 72.

5U84 Primary Storage Shelf / 5U84 Expansion Storage Shelf:

■

Height: 21.97cm (8.65") (approximately 5U - shelf, overall)

■

Width: 48.26cm (19") (across the mounting flange)

■

Length/depth: 91.44cm (36") (from rear of the front flanges to
the rear extremity of the chassis)

Note:

The lengths of the Veritas 5U84 Storage Shelves are

longer that what a standard IEC-compliant rack normally
supports. Due to the additional length, the rack-based PDU
hardware may need to be installed on the outside of the rack
to accommodate the storage shelves.

See

“ Veritas 5U84 Storage Shelf technical specifications”

on page 75.

Dimensions (IEC rack
compliant)

Appliance compute node: 23.26 kg (51.28 lbs)

5U84 Primary Storage Shelf: 135 kg (298 lbs) with drives; no rail
kit

5U84 Expansion Storage Shelf: 135 kg (298 lbs) with drives; no
rail kit

Maximum weight

Appliance compute node

■

300 watts

Each storage shelf

■

1000 watts

Typical power
consumption

Appliance compute node

■

600 watts

Each storage shelf

■

1300 watts

Maximum power
consumption

About the NetBackup 5340 Appliance

Features and components of the appliance

Summary of Contents for NetBackup 5340
























































































Search results

Summary of Contents for NetBackup 5340

Reviews:

Related manuals for NetBackup 5340

Brands by name

Popular brands

VERITAS NetBackup 5340, Appliance Product Description

Search results

Summary of Contents for NetBackup 5340

Reviews:

Related manuals for NetBackup 5340

Brands by name

Popular brands