Accessories
54K93.02
15 micron (1000x) Silicon Carbide Sheet, 8
1
/
2
"
× 11
"
54K94.02
5 micron (2500x) Silicon Carbide Sheet, 8
1
/
2
"
× 11
"
Note:
The tip of the adjusting screw is meant to rub on the fl at
surface, not the abrasive sheet. The distance between the blade and
the screw is approximately 6", so a half sheet of abrasive works
effi ciently. Unless you can apply a full sheet to a fl at surface large
enough to allow you to use the jointer blade sharpener from both
ends, cut replacement sheets in half to 5
1
/
2
" × 8
1
/
2
".
814 Proctor Avenue
Ogdensburg, New York
13669-2205 USA
1090 Morrison Drive
Ottawa, Ontario
K2H 1C2 Canada
www.veritastools.com
315
© Veritas Tools Inc. 2010
INS-106 Rev. D
Printed in Canada.
