![background image](http://html1.mh-extra.com/html/veris-industries/hw2-series/hw2-series_installation-manual_1004663008.webp)
Z207936-0E
Page 8 of 11
©2021 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 0921
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
HW2 Protocol Series Installation Guide
8. Install locking screw to secure cover in closed position.
Main Screen
The touchscreen user interface displays applicable sensor output values (temperature and RH), setpoint value and menu button.
Setpoint value (temperature setpoint shown)
Temperature Setpoint Display Option
Room Temperature Display Option
Fahrenheit/Celsius
Temperature
value
Fahrenheit/Celsius
Temperature
setpoint
Menu
button
RH
value
Menu
button
RH
value
.0
°C
100%
100%
20°
20
.5
°C
23
Menu Screen
The menu screen opens when pressing the Menu button on the main screen. Integrator’s submenu, occupancy/override,
Fahrenheit/Celsius, settings and setpoint submenu (temp, RH and fan) buttons are displayed on the menu screen.
Note: RH setpoint will
not appear on non-RH
models.
Menu Button Functions
Integrator’s Submenu
Press this icon to access the
Integrator’s menu.
Submenu Only
Occupied Override Button
Press this icon to provide
momentary signal output to
the controller
Signals occupied/override
call to controller.
Single Press Only
Fahrenheit/Celsius Switch
Press this icon to display either
°C or °F.
Changes units to
Fahrenheit when pressed.
Changes units to
Celsius when pressed.
Single Press Only
Model
HW2TP2A
Serial #
4E54F3B5
Installation (cont.)
Touchscreen Operation