13
PROBLEM
POSSIBLE CAUSE
SOLUTION
NO OZONE
NO POWER TO SYSTEM PLUG
CHECK POWER SUPPLY CORD IS SEATED INTO
VERIPURE SYSTEM AND WALL OUTLET.
RESET ANY GFI OUTLET RESET BUTTONS IN THE
AREA.
CHECK IN-HOME ELECTRICAL BREAKER.
FILTER LIFE IS EXPRIRED AND FILTER
IS LIMITING WATER PRESSURE TO
FLOW
SWITCH
CHANGE YOUR SYSTEM FILTERS.
WET GLASS DIELECTRIC
*CAREFULLY*
REMOVE THE GLASS
DIELECTRIC AND INSPECT FOR
MOISTURE. IF WET, CONTACT VERIPURE
2425 Hutson Road Green Bay, WI 54303
920.613.6771
DROP IN HOUSE OR MUNICIPLE
WATER PRESSURE
LOW WATER PRESSURE WILL NOT
ALLOW YOUR SYSTEM OZONATION
COMPONENTS TO TURN ON. REGAIN
INCOMING WATER PRESSURE TO
MINIMUM OF 50 PSI. CONTACT YOUR PLUMBER
OR MUNICIPALITY.
DROP IN OR NO WATER
FLOW
PLUGGED FILTER
CHANGE YOUR SYSTEM FILTERS.
DROP IN HOUSE OR MUNICIPLE
WATER PRESSURE
CONTACT YOUR PLUMBER OR
MUNICIPALITY.
SYSTEM LIGHTS NOT ON
NO POWER TO SYSTEM PLUG
CHECK POWER SUPPLY CORD IS SEATED INTO
VERIPURE SYSTEM AND WALL
OUTLET.
RESET ANY GFI OUTLET RESET BUTTONS IN THE
AREA.
CHECK IN-HOME ELECTRICAL BREAKER.
PANEL INDICATION
LIGHTS HAVE NOT
RETURNED TO STANDBY
MAY HAVE NOT UNPLUGGED POWER
WHEN CHANGING FILTER/GLASS
DIELECTRIC TUBE
UNPLUG YOUR SYSTEM, WAIT 10 SECONDS
PLUG BACK IN AND PRESS
THE RESET BUTTON
ON YOUR FRONT PANEL.
TROUBLE SHOOTING CHART
