background image

 

General Information 

 

Place of Installation 

The camera is specially designed for video surveillance in buses and fullfils the required European standards 
for public transport. 

 

 
 
 

Scope of Delivery 

 

High-resolution vehicle back eye camera with 3.0 mm fixed lens 

 

Connection cable 

 

Mounting materials 

 

Mounting instructions 

 
 
 

Accessories / Additional Equipment 

 

Video cable 75 Ohm (e.g. RG-59) 

 

BNC connector 

 
 
 

Warranty 

The warranty is valid for 24 months and begins on the date of delivery. Any defects must be reported within 
10 working days following delivery of the product. Hidden defects must be reported immediately when they 
are discovered.

 

 
The warranty does not include damages to the products caused by accidents, unsuitable or improper usage, 
non-authorized or incorrect mounting or startup, incorrect or improper handling, damages during transport or 
improper maintenance. The warranty does not include costs you incur from installation or initial operation as 
part of a warranty claim.

 

 
In response to a warranty claim we can choose to provide a replacement or repairs within an appropriate 
period of time. If the defect is not successfully remedied we have the option of rescission or reduction, in case 
of a negligible defect of reduction only.

 

 

5

Summary of Contents for RP105













Reviews: