- 2 -
- 3 -
Table of content
1.1 Technical Specifications
1
Introduction
2
1.1 Technical Specifications
3
1.2 Safety instructions
5
2 Mounting instructions
6
3 Settings
10
3.1 Temperature settings
10
4
Warranty
12
1. Introduction
Veria Control B35/45 is a electronic thermostat provided with
a 2-pole switch and a floor sensor to measure and control the
desired floor temperature. The thermostat is intended for
flush-mounting.
Veria Control is equipped with a LED indicator showing
standby periods (green light) and heating periods (red light).
The maximum temperature setting of the
Veria Control B35
Thermostat is 35°C, which makes it ideal for controlling
electrical heating mats beneath or on top of wood floors such
as parquet or laminates.
The
Veria Control B45
Thermostat can be used for
temperatures up to 45°C, which makes it ideal for controlling
electrical heating mats on top of concrete or screed floors or
underneath a tile or decorative stone covering.
Operating voltage
180-250 VAC, 50/60 Hz
Contact rating:
- resistive load
- inductive load
250V ~ 15A/3450W
cos
ϕ
= 0,3 Max. 4A
Sensor
NTC 15 kOhm at 25° C
Sensor values:
18°C
20°C
22°C
19,7 kOhm
18,0 kOhm
16,8 kOhm
Switching differential
±
0,2° C
Temperature range:
- Veria Control B35
- Veria Control B45
(0) 15-35° C
(0) 5-45° C
Ambient temperature
range
-10º to +30° C
Frost protection
(
)
15º C (B35) / 5º C (B45)
Led Indicator:
- No light
- Red light
- Green light
- Green light flashing
Thermostat off.
Heating mat/cable is active
The desired set point tempe-
rature has been reached.
Floor sensor is faulty
Protection rating
IP 31
Dimensions & weight
85mm x 85mm & 90 g
