Verdemax HTB20, Operating Manual

Page: 20 / 24

20
e) When operating a power tool outdoors, use
exclusively extension cables that are approved
for outdoor-use.
The use of an extension cable
that is suitable for outdoor use reduces the risk of
electric shock.
3) Personal safety
a) Always pay attention to what you do and apply
reasonable care when working with a power tool.
Do not use the tool when you are tired or under
the influence of medication, drugs or alcohol.
When working with power tools even a short
moment of inattentiveness may result in severe
injury.
b) Wear personal protection equipment and always
wear eye protection (safety goggles). Wearing
personal protection equipment as a dust mask,
nonslip safety shoes, safety helmet or ear pro-
tectors (depending on the type and use of the tool)
reduces the risk of injury.
c) Avoid unintentional operation. Make sure that
the switch is in “OFF” position before pulling the
plug from the main socket.
When carrying the
tool with your finger on the on/off switch or con-
necting the tool to the mains supply with the switch
in “ON” position, this may result in accidents.
d) Remove adjustment tools or wrenches and the
like before you switch the tool on. A wrench or
another tool that is inside or on a turning part of
the tool may cause injury.
e) Do not overestimate your abilities. Take care of a
safe footing and keep your balance at all times.
This will allow you to better control the tool in unex-
pected situations.
f) Wear suitable clothes. Do not wear wide clothing
or jewellery. Keep your hair, clothes and gloves
clear of all moving parts.
Loose clothing, jewellery
or long hair may get caught in moving parts.
g) If dust extraction/collection devices are provided
make sure that they are connected and used
properly.
The use of these devices reduces hazards
caused by dust.
4) Careful handling and use of power tools
a) Do not overtax the power tool. Use the power
tool intended for your type of work in each case.
The use of the suitable power tool within the stated
ran-ge of performance makes working more
effective and safer.
b) Do not use a power tool with a damaged switch.
A power tool that cannot be switched on or off
any more is dangerous and must be repaired.
c) Pull the mains plug out of the socket before you
adjust a tool, change accessories or put the tool
aside.
This precaution avoids the unintentional start
of the tool.
d) Store power tools out of the reach of children.
Do not allow persons to use the tool if they are
not familiar with the tool or these instructions.
Power tools are dangerous if used by inexpe-
rienced persons.
e) Thoroughly maintain your power tool. Check
whether moving parts are working properly and
are not jamming/sticking, and whether parts are
broken or otherwise damaged in a way that
affects the function of the tool.
Have damaged
parts repaired before using the tool. Many accidents
are the result of poorly maintained power tools.
f) Keep cutting tools sharp and clean. Thoroughly
looked-after cutting tools with sharp cutting edges
are jamming less often and are easier to guide.
g) Use power tools, accessories, add-on tools, etc.
in accordance with these instructions and in the
way prescribed for the respective type of tool.
You should also consider the working conditions
and the work to be carried out.
The use of power
tools for purposes other than those intended for
the respective tool may result in dangerous
situations.
5) Appropriate handling and use of battery-operated
power tools
a) Make sure that the device has been switched off
before inserting the battery. Inserting a battery
into a switched-on power tool may lead to
accidents!
b) Only use charging devices recommended by the
manufacturer to charge the batteries. Charging
units are usually designed for certain types of
batteries; if used with other types there is a risk of
fire!
c) Only use batteries designed for your power tool.
The use of other batteries may lead to injury and
risk of fire!
d) Keep unused batteries clear of paper clips, coins,
keys, nails, screws or other small metal objects
that may bridge the contacts.
A short circuit
between the battery contacts may lead to burns or
fire!
e) Improper use may result in fluid leaking out of
the battery. Avoid any contact with battery fluid.
Flush with water in case of contact. If battery fluid
should get into your eyes seek medical advice
additionally.
Leaking battery fluid may lead to
irritations of the skin or burns!
6) Service
a) Have the power tool serviced by qualified
technical personnel only; repairs should be
carried out using exclusively original spare parts.
This will ensure the safe operation of the power
tool.