7
Assembly
In the assembly of the table frame, use only the bolts to the prescribed
specifications.
ర
WARNING!
Incorrect screws can cause damage to the table.
1. For columns with fixed welded feet continue with step 2. For columns with
bolted feet, they must assembled first on the columns (please use the bolts to
the table frame-drawing). The max. tightening torque is 10 Nm! The max.
Screwing depth of the M10 in the Driving column is 9 mm! With asymmetrical
frames (C-form) please note that a left and a right side panel is required.
2x Screws M10
Foot
Column
WARNING! The max. screwing
depth in the Column is 9 mm. If the
Screw goes deeper, then the motor
may become damaged!
Please note that the max. tightening
torque for the screws is 10 Nm
