8
Select the operation mode.
2.
Mode explanation:
•
Loop (R): The command will be executed cyclically after you
•
press and release the button. Click button again to stop it.
One-Shot (P): The command will be executed when you
•
press the button.
One-Shot (R): The command will be executed after you
•
press and release the button.
Hold (1-Shot): The command will be executed while you
•
press and hold the button.
Loop (P): The command will be executed by cyclically when
•
you press the button.
Hold (Loop): The command will be executed cyclically
•
when you press and hold the button.
2-Phase: You can combine two commands groups, group
•
1 will be executed when press the button, group 2 will be
executed when release the button. You must insert “Pause”
command between ground 1 and 2.
Set up the LED indicator
3.
Press “Apply” to active new setting.
4.
Then go to “Script Programming” page.
5.
Script Programming in more detail
Interface
Input Area: command input area. All the process of command input or movement will be input in this area.
1.
Load Area: load script fi le from fi le or mouse.
2.
Edit Area: modify script process or description.
3.
Save Area: save script process or description into fi le or mouse
4.
3 group script
X, Y: -32768 ~ +32767 available
Repeat, Insert Delay time: 1 ~ 255
available
