Installation Guide
Safety Information
WARNING – RISK OF SERIOUS INJURY AND PROPERTY DAMAGE
Carefully read all instructions and product labels prior to installation.
To reduce risk of death, personal injury, electric shock, cuts/abrasions, falling
parts or property damage from fire, carefully read all warnings, instructions and
product labels.
Wear gloves and safety glasses at all times when removing light fixture from
carton, installing, servicing or performing maintenance.
Ensure that your installation matches all elements shown in the descriptions and
drawings of the installation instructions before you begin.
Save these instructions for future reference.
•
PRIOR TO INSTALLATION, MAINTENANCE, INSPECTION OR
REMOVAL, TURN OFF ELECTRICAL POWER AT FUSE OR CIRCUIT
BREAKER BOX.
•
CAUTION: RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT use input
power other than the voltage specified in the product specifications.
•
The installation, service and maintenance of this light fixture must be
performed by a licensed electrician. If you are not qualified, contact a
licensed electrician.
•
Product installation must comply with the National Electrical Code and all
local electrical and building codes and regulations.
•
All wiring connections should be capped with UL approved wire
connectors.
•
DO NOT use outdoors.
•
DO NOT install if product is damaged.
•
DO NOT use this equipment other than for its intended use.
•
DO NOT allow the wiring to contact sharp edges, such as sheet metal
edges.
•
Suitable for use in damp locations.
•
Suitable for use in -4 to 122ºF ambient temperatures.
•
Keep combustible and other materials that can burn away from light fixture
and lamp/lens.
•
Avoid looking directly into light while on.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation.
