Product Specifications
Part
Number
Model Number
Input
Voltage
(VAC)
Input
Wattage
(W)
Input
Current
(mA)
Input
Frequency
(Hz)
Lumens
(lm)
CCT
(K)
Dimensions
LxWxH (in)
Weight
(lbs)
70623
HB-110W-C50-MS
120-277 110
917-397
50/60
14,850
5000 24 x 9.6 x 2
6.8
70607
HB-165W-C50-MS
165
1375-596
22,275
24 x 12.6 x 2
9
70624
HB-225W-C50-MS
225
1833-794
29,700
24 x 17.3 x 2
10.6
Wiring Diagrams
Power 120-277V
Black (Line)
White (Neutral)
Green (Ground)
LED Driver
Blue (-)
Red (+)
Wires to LED Load
Installation Instructions for Receptacle Twist-In Sensor
1. Remove the motion sensor cover by turning it counterclockwise and
twisting it out.
a. Motion sensor cover
2. Insert the housing cover with the motion sensor module by turning it
clockwise and tightening.
a. Housing cover with the motion sensor module
3. The installation is complete.
Wiring Diagram:
The PnP sensor receptacle with PCB circuit
Purple (DIM)
DIM
Grey (GND)
GND
Red (+12V)
+12V
The housing cover with sensor module
Installation Instructions
Included chain kit:
•
V hooks (2)
•
1.05m chain (2)
1. Thread the end of a chain over each V hook. Secure each chain to a load
bearing structure that is rated for the weight of the fixture. See Figure 1.
2. Insert V hooks onto two opposite sides of the fixture. Make sure the hooks are
fully engaged into the side holes as shown. See Figure 2.
3. Connect the main power supply according to the wiring diagram
above.
4. Double check the security of all mounting hardware.