Unit Deployment and Removal
Ver-Mac 2018
PCMS Operations, Safety & Maintenance V3.0
9
3.5
Takedown of Signboard and Solar Array
1.
Shut off the signboard (Power ON/OFF switch)
2.
Unlock sign hand brake and turn the signboard until it is in position above the
transportation cradle
3.
Unlock the brake and rotate the array to the transportation position. Make sure
the support bar on the back of the array is above the rubber stops
4.
Wind the tilt arm adjustment knob until the solar panels are tight against the
sign case for transport
5.
Lock the solar panel handbrake
3.6
Trailer Removal
WARNING
Be very careful when attempting to maneuver trailer into
position to attach it to tow vehicle.
1.
Make sure power is OFF, signboard and solar panels down and in their
respective transportation cradles and the sign brake engaged
2.
Back tow vehicle as close as possible to the trailer
3.
Lower jacks till wheels are on the ground
4.
Block the wheels and swivel all but one jack into horizontal travelling position
5.
Attach the coupler/hitch securely to ball on tow vehicle(snug on the ball)
6.
Cross the safety chains under the hitch and attach the hooks to the tow vehicle
from the underside
7.
Attach breakaway cable to tow vehicle if the trailer is equipped with brakes
Make sure it is not taut, not around the ball or caught in the chains
8.
Connect power plug to the tow vehicle having first removed it from the optional
holder(if available)
9.
Do the walk-around check before driving off
