Veo Photo Traveler for Palm handhelds
- 7 -
6) After all the drivers and software are finished installing, plug the camera into
the Palm handheld’s expansion slot until it is snug. The camera will click into the
slot when fully engaged.
***
7) To remove the camera, lightly push down on the camera since the socket is a
push-push type.
NOTE: On Windows 98 and Windows 2000, Windows Media Player will be
installed after the bundle software is installed. Make sure if you are running
Windows 98 or Windows 2000, you wait for the Windows Media Player
installation to finish.
*NOTE: If Autorun does not start, choose
Run
from the Windows Start Menu.
Assuming your CD-ROM drive is the D drive, type “d:\Autorun” in the Run dialog
box. If Autorun still does not run, consult your computer manual or manufacturer
to locate the CD-ROM drive.
**NOTE: The bundle software Veo Creative Studio must have DirectX installed,
pre-installed in Windows XP. Click on the
Veo Creative Studio
icon on your
desktop and it will prompt you to install DirectX. You must restart your computer
to complete the installation.
***NOTE: Make sure the card is facing the right direction. The right direction is
shown in picture located near the slots of the Palm handhelds.
