background image

Network Camera User’s Guide 

 26/83 

 
Camera PT:

   

User can control the direction of Pan and Tilt as wish. 
Reverse Pan: Check this option to reverse pan direction. 
Reverse Tilt: Check this option to reverse tilt direction. 

 
 
Image Size:

   

Network Camera provides 4 resolutions: 

• 176x144   
• 320x240   
• 352x288   
• 640x480 

 
 

Image Quality: 

The Network Camera provide 3 quality setting,   

Clarity: Video is better but frame rate may be slower 
Fluency: Video is not as good as Clarity but frame rate may be higher 
Default: System default value

.

 

 

Note

: The value on the list box display the current setting of the current image, when 

you make a new selection, the value on the list box will be changed until you save the 
new setting.   
 

Image, Mirror, Focus Mode, White Balance Mode, Exposure Mode: 

These functions are available for PTZ Network Camera and Video Server only. It’s not 
functional for this model. 
 

Saturation, Sharpness, Contrast, Hue: 

To control the camera, key in these values respectively. 
 
 

Audio: 

This function is not available for this model. 
 
 

Camera Tour: 

This function is not available for this model. 
 
 

Reset to Default: 

Restore the values of these pages to factory default value. 

Summary of Contents for Infra-Red




















































































Reviews: