GB - 12
INSTALLATION
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be
wall-mounted with a VESA-compliant 3” x 3” (75mm x
75mm) mounting kit designed for flat-panel TVs (sold
separately). Mount this unit according to the instructions
included in the mounting kit.
NOTE
Remove the base stand before mounting the unit on the
wall.
INSTALLING / REMOVING THE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact
with it. Do NOT exert pressure on the front of the unit at any time because the screen could crack.
1. Disconnect all cables or cords connected to the unit.
2. Lay the unit down on a flat surface with the back side facing up. Please make sure to place a soft cushioned
material (such as a pillow or thick piece of foam) beneath the screen.
3. To install the base stand, place the base stand on the
mounting slot, push the stand till it locks.
4. To remove the base stand, keep pressing the locking
area of the base stand and pull downwards to release
the base stand.
USING HEADPHONES/EARPHONES
• Turn down the volume before connecting
headphones/earphones to the unit, then adjust
the volume to your desired level.
• When headphones/earphones are connected,
no sound will come from the front speakers.
NOTE
Avoid listening to sound at high levels for prolonged
periods of time. This may be harmful to you and
may cause hearing loss.
Headphones/earphones
(1/8" [3.5mm] diameter plug)
